Рынок дизель-генераторных установок

• Altitude height 1000 meters and below
• Temperature down limit -15°C, up limit 55°C.

• Ultra low noise, adequate quiet environment to ensure that the hospital doctors work at ease, especially to ensure that the operation room can be quietly carried out surgical activities, but also to ensure that patients can have a quiet rest and recuperation environment.

• Высокая прочность и особая конструкция гарантируют безупречную и беспрепятственную работу генераторной установки в варварских условиях эксплуатации. Особая утолщенная конструкция, долговечное, износостойкое и ударопрочное основания, гарантирует долгосрочную эксплуатацию и безопасную транспортировку установки.
• The starting mode of the unit is automatic starting mode. The unit must have the function of AMF (automatic electricity failure), equipped with ATS, to achieve automatic starting. When the electricity fails, the starting time delay < 5 seconds (adjustable), can automatically start the unit (a total of three consecutive automatic start function), power / unit negative switching time is < 10 seconds, fully meet the input load time is less than 12 seconds, power recovery after the unit to maintain 0-300 a second operation after cooling (adjustable) automatic shutdown.

• Стабильные характеристики, средний период времени между возникновениями неисправностей составляет более 1000 часов;
• In terms of technical performance, the no-load voltage setting range of the unit is 95-105% rated voltage.

The generator with stable performance and low noise design is equipped with PLC-7420 control system with AMF function. Through the connection with ATS, it ensures that the power supply must be supplied immediately when the main power source is switched off. Stable, low noise, engine power in accordance with European and American emission standards, as well as AMF function and ATS equipment, to meet the special requirements of the hospital. By means of RS232 or RS485/422 communication interface, the computer can be connected with each other to carry out remote monitoring to realize remote control, remote communication and telemetry, so as to achieve automatic and unattended operation.